£3.49 DELIVERY UK MAINLAND

NOW SENDING TO USA, CANADA, AUSTRALIA AND EUROPE

Trusted 10+ Years | Superb Quality & Service ⭐⭐⭐⭐⭐

DIY Giant Penguin Tutorial

2 minute de lecture

DIY Giant Penguin Tutorial

A fun winter craft using strong layers and simple shapes. Perfect for classrooms, clubs, and festive displays.

You’ll Need

Item Notes / Alternatives
Wet strength tissue paper Tears less when wet; ideal for layering strength
Large sphere (football works!) Any large round form; cover with cling film first if needed
PVA glue + water Mix to a brushable paste (see Step 1)
Paintbrush + black paint Acrylic or poster paint
Scissors For flippers, feet, and beak
Orange card Feet + beak
Black card Flippers

Step-by-Step Tutorial

Step One: Mix your paste: Combine PVA glue with a little water until smooth and brushable.

Step Two: Build the body: Brush paste onto the sphere, layer tissue strips, and repeat until covered. Let dry for 5–10 minutes.

Step Three: Add the feet: Cut two large orange card feet, glue to the bottom, and allow the structure to dry for 1 hour (or until firm).

Step Four: Make the details: Cut flippers from black card and a beak (One triangle) from orange card. Set aside.

Step Five: Paint the penguin: Once dry, paint half of the body black, leaving the tummy white. Let dry completely.

Step Six: Finish the face: Glue on the beak, flippers, and eyes (draw, cut from card, or use stick-on eyes).

✨ And there you have it — a giant, adorable penguin ready to display! 🐧

Pro Tips

  • Overlap tissue strips for strength.
  • Two or three thin layers dry faster and hold better than one thick layer.
  • Hold card pieces in place for a few seconds so they stick firmly.

FAQ

How many layers of tissue? 2–3 full layers are enough, add a 4th for joints.
How to speed drying? Thin layers + airflow. Avoid high heat sources.
How to hollow it out? Wrap the ball in cling film first, then remove once dry.

🐧 We’d love to see your penguins! Share your creations with us.

Tag @CarnivalPapersUK

Featured Products

Précédent Suivant

Laissez un commentaire

Veuillez noter : les commentaires doivent être approuvés avant d’être publiés.